Clarke CHL1000TD Скачать руководство пользователя страница 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Halogen Light.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

SPECIFICATIONS

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. This guarantee does not effect your 
statutory rights.

Model No

SUPPLY REQUIRED

OUTPUT PER LAMP

CHL500D

230V 50HZ

500W

CHL500SD

230V 50HZ

500W

CHL500TD

230V 50HZ

500W

CHL1000TD

230V 50HZ

500W

CHL150D

230V 50HZ

150W

CHL151D

230V 50HZ

150W

CHL100D

110V 50HZ

500W

CHL110D

110V 50HZ

500W

CHL120D

110V 50HZ

500W

Содержание CHL1000TD













Отзывы: