SETUP AND OPERATION CONTINUED
BUCKET EMPTYING
1.
When the bucket is full the ‘FULL’ light will blink. The machine will also beep
three times.
2.
Wait a few minutes to allow the machine to stop operating before removing
the bucket.
3.
To remove the bucket, grip each side and lever out, carefully lift and pour the
water away, then replace back into the correct position.
CONTINUOUS WATER DRAIN
For continuous water drainage use a hose with an inner diameter of 12.7mm (½ inch).
1.
Use a screw driver to carefully
remove the knock out at the
back of the unit.
2.
Attach the hose to the
connector through the hole.
3.
The hose should be lead to
the drain with no sharp bends.
- 8 -