13
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
USING THE PUSH STICK
• The push-stick serves as an extension of the operators hand as
protection against accidentally touching the saw blade.
• The push-stick should be used if the distance between the blade and rip
fence is less than approx 150 mm.
• Always replace the push-stick if lost or damaged.
USING THE MITRE GAUGE
1. The mitre gauge is inserted into
the table slot from the front edge.
2. To set a mitre angle, loosen the
locking knob by turning it
counterclockwise.
3. Firmly tighten the locking knob to
secure the mitre gauge in
position.
TILTING THE TABLE
1. Loosen the table tilt clamp.
2. Adjust the table to the required
angle.
• We recommend that you use a
protractor to ensure accuracy.
3. Retighten the table tilt clamp.
NOTE:
The scale and pointer can
be adjusted by loosening the
screw on the pointer.
Содержание CBS250B
Страница 21: ...21 Parts Service 020 8988 7400 E mail Parts clarkeinternational com or Service clarkeinternational com...
Страница 26: ...26 Parts Service 020 8988 7400 E mail Parts clarkeinternational com or Service clarkeinternational com...
Страница 27: ...27 Parts Service 020 8988 7400 E mail Parts clarkeinternational com or Service clarkeinternational com...
Страница 28: ......
