Clarke CAT113, Руководство по сборке и инструкция

Страница: 3 / 12

3
SAFETY PRECAUTIONS
WORK ENVIRONMENT
• Keep the work area clean and tidy.
• Dress appropriately - Do not wear loose clothing or jewellery.
• Tie long hair out of the way.
• Do not operate the cut off tool where there are flammable liquids or gases.
• Keep the air supply hose away from heat, oil and sharp edges.
• Do not fit the cut off tool to any stand or clamping device.
USE
• Stay alert and use common sense - Do not operate the cut off tool when
you are tired or under the influence of alcohol, drugs or medication.
• Always wear eye protectors when using the cut off tool - Eye protectors
must provide protection from flying particles from the front and the side.
• Always wear ear protectors when using the cut off tool.
• Do not overreach - Keep proper footing and balance at all times.
• Never use any type of bottled gas as a source of power for the cut off tool.
• Do not connect the air supply hose with your finger on the trigger.
• Do not exceed the maximum recommended pressure for the cut off tool:
90 psi / 6.2 bar.
• Check hoses for leaks or worn condition before use, and ensure that all
connections are secure.
• Do not use the cut off tool for any other purpose than described in this
book.
• Do not carry out any alterations or modifications to the cut off tool.
• Never use the cut off tool if it is defective or operating abnormally.
• The cut off tool should be serviced at regular intervals by qualified service
personnel.
• Avoid damaging the cut off tool for example by applying excessive force
of any kind.
• Alway keep the cut off tool in good condition.