Clarke Arc/Tig135, Инструкция по эксплуатации и обслуживанию

Страница: 17 / 28

17
THE ARC/TIG 135 COMPONENTS
1 ON/OFF Switch
2 Adjusting weld current potentiometer
3 Green LED indicating power ON
LED ON = Power ON, when switching the unit on, it illuminates a short while after the orange
LED. Flashing LED = indicates an alarm condition due to an anomaly in the input voltage. During
the green LED flashing time, the unit checks the line voltage untill it reaches an acceptable value.
When there is no alarm condition, the green LED stays on.
4 Orange LED
LED on = indicates an alarm condition due to overheating of the primary circuit. If both orange
and green LEDs are on, the unit needs to cool down. After cooling, the orange LED will
automatically go out.
Flashing LED = an alarm condition exists due to undervoltage, overheating on the secondary or
an input short circuit. Leave the unit to cool down if the temperature has been exceeded. When
there is no alarm condition, the orange LED goes off and the green LED stays on.
5 25mm 2 positive socket
6 25mm 2 negative socket
7 Input (power) cable