Clarke American Sanders 07095A, Руководство оператора

Страница: 2 / 82

EN
ENGLISH
- 2 - FORM NO. 70147B
Clarke
®
American Sanders Operator's Manual (EN) - EZ-8 Sander (CE)
Operator Safety Instructions ........................................................ 3
Introduction and Machine Speci
fi cations ..................................... 5
How to Transport the Machine..................................................... 6
Machine Set-Up ........................................................................... 7
How to Operate the Machine ....................................................... 9
Sanding Cuts and Sandpaper .................................................. 10
Sander Adjustment Procedures ..................................................11
Routine Maintenance................................................................. 12
Troubleshooting ......................................................................... 13
Section II Parts and Service Manual
Assembly Drawing #1 ............................................................... 76
Assembly Parts List #1 ............................................................. 77
Assembly Drawing #2 ................................................................ 78
Assembly Parts List #2 .............................................................. 79
Wiring Diagram .......................................................................... 80
Contents of this Book
READ THIS BOOK
This book has important information for the use and safe operation of this machine. Failure to
read this book prior to operating or attempting any service or maintenance procedure to your
Clarke American Sanders machine could result in injury to you or to other personnel; damage to
the machine or to other property could occur as well. You must have training in the operation of
this machine before using it. If operator(s) cannot read English, have this manual explained fully
before attempting to operate this machine.
All directions given in this book are as seen from the operator’s position at the rear of the ma-
chine.