Clarke 7623032, Инструкция по эксплуатации и техническому обслуживанию

Страница: 8 / 16

8
2. Remove the filler plug.
• The oil should be almost level
with the bottom of the oil filler
hole.
• Oil can be topped up using
Clarke Hydraulic Oil (p/n
3050830 1 litre).
3. Purge any air from the system and
replace the filler plug.
4. Dispose of old/spilled oil appropriately and wipe up any spillage.
STORAGE
1. Store in a dry place with the ram fully lowered. If stored for long periods,
inspect at least once a year, clean and re-oil. For servicing, contact your
CLARKE dealer, or CLARKE International Service Department.
ENVIRONMENTAL PROTECTION
One of the most damaging sources of environmental pollution is oil products.
Never throw away used hydraulic oil with domestic refuse or flush it down a
sink or drain. Collect any hydraulic oil in a leak proof container and take it to
your local waste disposal site.
If disposing of this product or any damaged components, do not dispose of
with general waste. This product contains valuable raw materials and should
be taken to your local civic amenity site for recycling of metal products.