Clarke 7623032, Инструкция по эксплуатации и техническому обслуживанию

Страница: 5 / 16

5
UNPACKING AND ASSEMBLY
1. Remove the retaining clip by
pressing the handle yoke down-
wards and pulling the clip away.
2. Loosen the thumb screw in the
yoke until the lower handle can
be inserted fully into the handle
socket.
• The lower handle has a groove
which should engage with the
thumb screw once it is re-
tightened.
• The socket in the handle will engage with the jack control valve at
the base of the yoke.
3. Tighten the thumb screw to
secure the lower handle to the
jack.
4. Add the upper handle by sliding it
onto the lower handle and secure
with the bolt provided.
5. Place the protective rubber pad
onto the saddle.