Clarke 7617000, Инструкция по эксплуатации и техническому обслуживанию

Страница: 4 / 16

4
SAFETY PRECAUTIONS
WORK AREA
1. Keep the work area clean and well lit. Cluttered and dark areas invite
accidents.
2. Keep children and bystanders away while working. Distractions can cause
you to lose control and bystanders should be kept at a safe distance from
the working area especially when work is in progress.
PERSONAL SAFETY
1. Stay alert, watch what you are doing and use common sense when using
this equipment. Do not operate this equipment when you are tired, ill or
under the influence of alcohol, drugs or medication.
2. Do not over-reach. Keep your proper footing and balance at all times. This
enables better control of the equipment in unexpected situations.
3. Concentrate on the job in hand, no matter how trivial it may seem. Be
aware that accidents are caused by carelessness due to familiarity.
4. Do not wear loose clothing or jewelry which may get caught in moving
parts. Wear protective hair covering to contain long hair. For best footing,
wear rubber soled footwear. Keep floor clear of oil, scrap wood, etc.
5. Before working on a vehicle with this repair kit, ensure the vehicle is well
supported and completely stable.
6. Remember that during body repair, there is always the possibility of a fixture
slipping or a body part failing, which could cause the vehicle to jolt
suddenly. If the vehicle is not adequately supported, it could fall with
possibly serious consequences.
7. Never use an additional extension handle to operate the pump.
8. Never modify this equipment in any way.
9. Check the equipment for damage before use. Any damaged part should
be discarded and replaced. Check for alignment of parts, breakage of
parts, and any other condition that may affect the operation. Any
damage should be properly repaired or the part replaced. If in doubt, DO
NOT use. Consult your local Clarke dealer.
10. Store out of the reach of children and do not allow persons unfamiliar with
these instructions to use this product.
WARNING: THE OPERATOR MUST FOLLOW ALL INSTRUCTIONS WITHIN THIS
INSTRUCTION BOOKLET