7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
2. Fit the protective screen assembly
to the brackets and ensure it can
be set in one of the available
positions using the latches on
each side.
PURGING THE HYDRAULIC SYSTEM
1. Open the release valve by turning
anti-clockwise.
2. Pump the handle or foot pedal
several full strokes to eliminate any
air bubbles from the system.
3. Close the release valve, turning
clockwise.
POSITIONING THE PRESSING BED
1. Use the winch to raise the pressing
bed into a suitable position.
•
The arrows on the winch
indicate the direction of
movement.
•
The pressing bed should be as
close as possible to the ram
when the workpiece is
mounted on it.
Содержание 7615203
Страница 20: ......
