11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
MAINTENANCE
ROUTINELY
A visual inspection must be made before each use of the press, checking for
leaking hydraulic fluid and damaged, loose, or missing parts.
Owners and/or users should be aware that repair of this equipment requires
specialised knowledge and facilities. It is recommended that a thorough
annual inspection of the press be made and that any defective parts be
replaced with genuine CLARKE parts.
If the press appears to be damaged in any way, is found to be badly worn, or
operates abnormally SHOULD BE REMOVED FROM SERVICE until the necessary
repairs are made.
If the press is not to be used for any length of time, store it with the ram piston
withdrawn to protect the surface of the moving parts.
PERIODICALLY
Check the press to make sure all bolts are tight and inspect for cracked welds,
bent, loose or missing parts.
Clean any foreign material from the ram carrier. Keep the protective screen (if
fitted) clean at all times.
Check the hydraulic connections for leaks. Replace or properly repair any
damaged or leaking hydraulic components before using. Note any loss of oil
and if oil is seen to become foul, replace using CLARKE hydraulic oil, Part No.
3050830.
If any rust is apparent on the structure it must be removed completely and the
paint restored.
DISPOSAL OF UNWANTED MATERIALS
One of the most damaging sources of environmental pollution is oil products.
Never throw away used oil with domestic refuse or flush it down a sink or drain.
Collect any oil in a leak proof container and take it to your local waste
disposal site.
Should hydraulic components become completely unserviceable and require
disposal, draw off the oil into an approved container and dispose of the
product and the oil according to local regulations.
When requesting spare parts, please quote the number on the diagrams/parts
lists on pages 13-17.
Содержание 7615203
Страница 20: ......
