Clarke 7610148, Инструкция по эксплуатации и техническому обслуживанию

Страница: 6 / 16

6
OPERATION
Before raising or lowering the table:
1. Check for any damage or worn parts. Do not use the lifting table unless it is
perfectly serviceable.
2. Lock the castor brakes before loading the table. (A brake is provided on
each castor for safety).
3. Ensure the load is completely stable and evenly spread on the table and
secured if necessary.
4. Ensure that no obstacles can snag or prevent the table from being raised.
RAISING A LOAD
1. Pump the foot lever (59) until the table reaches the desired height. (The
release lever (65) is spring loaded to return it to its closed position).
SAFETY BARS (‘A’ FIG.1)
IMPORTANT: When working with
the table raised, the safety support
bars must be put in place and the
table lowered so that the load is
supported by the safety bars and
not by the hydraulic ram, as
shown in the illustration. The safety
bars are secured with a clip, one
to each leg of the lift.
2. Make one final check to ensure
that there are no obstructions
to lifting and that all personnel are well clear before continuing to pump
the handle and lift the load.
LOWERING THE LOAD
1. Slowly pull the release lever (65) upwards. Ensure the load is lowered in a
fully controlled manner - do not jerk the lever upwards.
• Releasing the lever will cause the table to stop at any desirable
height.
WARNING: BEFORE LIFTING, ENSURE THE SAFETY PRECAUTIONS ARE
STRICTLY FOLLOWED. NO RESPONSIBILITY CAN BE ACCEPTED FOR
INCORRECT USE OF THE TABLE.