Clarke 7610148, Инструкция по эксплуатации и техническому обслуживанию

Страница: 3 / 16

3
SAFETY PRECAUTIONS
THE LIFTING TABLE
1. The table must be maintained and repaired in accordance with the these
instructions. Such maintenance and repair must be carried out by qualified
persons and tested prior to returning to service.
2. Ensure that the lift table is in good working order. Have any damaged parts
repaired or replaced immediately. Use genuine Clarke parts only. The use
of unauthorised parts may be dangerous and will invalidate the
guarantee.
3. Do not exceed the maximum safe working load of the table stated in the
Technical Specification on page 2. Always ensure the load is evenly
distributed across the table.
4. Never tamper with the lifting table or modify it in any way, as this could
prove to be dangerous and will invalidate the guarantee. Only use the
product for the purpose for which it is intended.
5. Do not use if an oil leak is apparent. Consult your Clarke dealer.
6. Check the condition of the labels regularly and replace as required. Labels
are provided in accordance with BSEN1570.
THE WORKPLACE
1. Only use in a suitable, well lit work area.
2. Keep the work area clean and tidy and free from unrelated items.
3. Use the lifting table on level and solid ground, preferably concrete. Avoid
soft/unmade ground as the wheels may sink in. Excessive force may be
invited to move the table if floor conditions are poor.
4. Use appropriate safety equipment, such as protective footwear, when
using this product.
DURING OPERATION
1. Never climb on, or attempt to ride on the lifting table.
2. Never use the lifting table for lifting, lowering or transporting persons.
3. Never transport a load in the raised position.
WARNING: THE USER MUST FOLLOW ALL INSTRUCTIONS WITHIN THIS
INSTRUCTION MANUAL AND NOT OPERATE THE LIFTING TABLE UNTIL
HAVING DONE SO.