Clarke 7333220, Инструкция по эксплуатации и техническому обслуживанию

Страница: 8 / 20

8
CONNECTING THE HIGH PRESSURE HOSE
1. Screw the connector on the end
of the high pressure hose onto the
water outlet pipe.
2. Tighten the connector by hand
only. Do not use a spanner.
NOTE: Make sure the connection is
secure.
CONNECT WATER SOURCE
1. Connect the water supply hose to
the water inlet.
NOTE: Water source must provide a
minimum of 6.6 litres per
minute.
NOTE: Make sure the water
connection is secure.
CONNECTING THE GUN TO THE HOSE
This gun may not be supplied fitted to the hose. If it is not fitted connect as
follows
1. Slide the hose lock button down
as shown.
2. Insert the hose into the base of the
gun and twist the hose support
clockwise to lock it into position.
3. Slide the hose lock button up.