5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5. ALWAYS use an approved cable extension suitable for the power rating of
the pump (see specifications). The conductor size should also be at least
the same size as that on the pump, or larger. When using a cable reel,
always unwind the cable completely.
6. ALWAYS maintain the pump with care and keep it clean.
7. NEVER use for pumping flammable liquids or corrosive chemicals. These
pumps are designed to pump water only.
8. NEVER abuse the electrical cable. Never use the cable for pulling or
unplugging the pump. Damaged or tangled cables increase the risk of
electric shock.
9. NEVER run the pump dry. Always ensure the pump is immersed in water
before starting. Switch the pump off immediately the task is completed
10. NEVER pump water from a swimming pool when there is a person or animal
still in the pool.
11. NEVER install the pump on sand, silt or mud which is likely to shift or
collapse.
12. NEVER modify this pump in any way. Use it only for the purpose for which it
is designed.
SERVICING & REPAIRS
1. ALWAYS have the pump serviced by your local CLARKE dealer, using only
identical replacement parts. This will ensure the safety of the pump is
maintained. The use of non standard parts could be hazardous.
2. NEVER attempt any repairs yourself unless qualified. If you have a problem
with the pump contact your local CLARKE dealer.
3. ALWAYS disconnect the pump from the electrical supply before placing it
into, or removing from the water, and before any cleaning or
maintenance.
4. If the power cable becomes damaged, it must be replaced rather than
repaired.
5. Your CLARKE water pump has been designed to give long and trouble free
service. If, however, having followed the instructions in this booklet
carefully, you encounter problems, take the unit to your local CLARKE
dealer.
Содержание 7230294
Страница 16: ......