Clarke 7230294 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 16

Clarke 7230294 Скачать руководство пользователя страница 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE submersible pump.

The CLARKE range of submersible pumps are suitable for discharging pools,
ponds, fountains, pits and any waste water drainage. They can handle foul
water containing suspended material as stated in the specification. The
pumps are not suitable for handling inflammable, corrosive, explosive or
dangerous liquids. The pump is water-cooled and does not contain any oil.

High-head pumps are designed to create high water pressure, allowing water
to be pumped to great heights, or over long distances. The ‘Pump
Performance Curve’ graph shown, displays the characteristics graphically
and describes the relation between the flow-rate and the head for the pump.

The pump is provided with a thermal overload cut-out, so that in the event
that the pump becomes overheated (due to becoming blocked etc) it will
shut off automatically. When the blockage has been cleared, the thermal
cutout will cool down and re-set and the pump can be re-started.

Before attempting to use this product, it is essential that you read this manual
thoroughly and carefully follow all instructions given. In doing so you will ensure
the safety of yourself and that of others around you, and you can also look
forward to the product giving you long and satisfactory service.

SPECIFICATIONS

Voltage

230V~50Hz

Max input power

550 W

Output rating

830 W

Maximum Head Height

20 m

Maximum Depth

8 m

Maximum Flow

180 l/min

Maximum Operating Temperature

40

o

C

Maximum solid body size in suspension

8 mm

Minimum pickup depth

50 mm

Weight

14 kg

Cable Length

10 m

Ingress protection rating

IP68

Dimensions (D x W x H)

220 x 150 x 385 mm

Outlet Thread Diameter

1

¼

“BSP (32mm thread)

«
1
2
3
4
...
»

Содержание 7230294

















Отзывы:

Нет отзывов