Clarke 7140635, Инструкция по эксплуатации и обслуживанию

Страница: 12 / 28

12
MAINTENANCE
1 Always maintain the pump in a clean condition, checking regularly for
loose bolts etc.
AIR FILTER
1. Clean the air filter once every
50 hours of use (or more often
in unusually dusty conditions)
as follows. Unscrew both the
plastic wingnuts and lift out the
cleaner element. Clean the
foam filter element with
domestic detergents and
clean the mesh element by
knocking against a solid object
or blow out any dust with a
high pressure air jet. Never
operate the pump without the
air cleaner installed as this would
cause premature wear to the engine.
SPARK PLUGS
1. Replace the spark plug after the first month or
every 50 hours of use. Check when installing
that the spark plug has the correct clearance
by measuring with a feeler gauge and adjusting
the side electrode as required. Clearance
should be 0.6-0.7mm (0.024-0.028in). The
recommended type is F6TC.
FUEL STRAINER
1. Clean the fuel tank strainer every
100 hours running. Remove the filler
cap, lift out the filter and strainer
and clean it with a soft brush before
replacing and topping up with fresh
fuel to the level of the shoulder of
the strainer.
2. Check the condition of the fuel
hose after approx 2- years use. It
should be replaced if there is signs
of aging and cracking. Ensure it is
tightly secured to prevent leakage.
Fig 7
Fig 8
Fig 9