9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5. Take care that the selection of the saw blade is suitable for the material to
be cut.
6. Make sure the blade is not contacting the riving knife or workpiece before
the switch is turned on.
7. Wear gloves when handling saw blades and rough material. Saw blades
shall be carried in a holder whenever practicable. Take care that gloves
can catch on rotating blades.
KICKBACK
Kickback is a sudden reaction to a pinched, bound or misaligned saw blade,
it causes the workpiece to be ejected from the tool back towards the
operator. Kickbacks can lead to serious personal injury.
You can avoid kickbacks by:
a. Keeping the blade sharp,
b. Keeping the rip fence parallel to the blade,
c. Keeping the riving knife and blade guard in place and operating properly,
d. Not releasing the workpiece until you have pushed it all the way past the
blade,
e. Not ripping a workpiece that is twisted or warped or does not have a
straight edge to guide along the fence.
If you do not have a clear understanding of kickback and how it occurs,
DO
NOT
use the table saw.
REMAINING HAZARDS
The machine has been built in accordance with recognized safety standards
but some remaining hazards may still exist.
These can be minimized by following the instructions in the operating manual.
Содержание 6500752
Страница 28: ......
