12
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY
The following items should be supplied in the carton. If any parts are missing,
do not use your table saw until the missing parts are obtained.
ASSEMBLING THE STAND
NOTE:
The table saw can be operated without the stand if required.
1. Assemble the stand as shown by
joining the cross members to the
legs using the bolts, flat washers,
spring washers and nuts supplied.
• The long cross members are
fitted nearer to the feet.
2. Fit the rubber feet to the legs.
Table Saw
Fixings Pack
Parallel Guide Fence
Push Stick
Mitre Guide/fence
10” TCT Blade (fitted)
Blade Guard Assembly
Hex key
Sliding table extension x 2
Ring spanners (large & small)
Stand components:
4 x legs
4 x Upper crossbars
4 x Lower crossbars
4 x Rubber feet
2 x Stand stabilisers
Содержание 6500752
Страница 28: ......
