Clarke 6479531 Скачать руководство пользователя страница 9

Страница: 9 / 16

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

ADJUSTMENTS

FORWARD/REVERSE OPERATION

The forward/reverse switch is used to select the direction of rotation.

1. Use the forward/reverse switch to

select the direction of rotation.

2. Reverse should only be selected

when removing screws.

SAFETY LOCK OFF

The forward/reverse switch can be
used as the safety lock off button by
pushing it half way through the drill
body.

SPEED RANGE

Use the speed range selector to
select the range you want to use.

• Setting 1: - 0-400 rpm

• Setting 2: - 0-1500 rpm

NOTE:

Only use the speed range
selector when the chuck is
stationary.

WARNING: ALWAYS LOCK THE TRIGGER SWITCH IN THE OFF (CENTRAL)
POSITION WHEN THE DRILL IS NOT BEING USED OR ADJUSTMENTS ARE
BEING MADE TO THE SPEED OR TORQUE SETTINGS. THIS IS AN IMPORTANT
SAFETY FEATURE AND MUST BE OBSERVED.

Содержание 6479531

















Результаты поиска

Содержание 6479531

Отзывы:

Похожие инструкции для 6479531

Бренды по названию

Популярные бренды

Clarke 6479531, Инструкция по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание 6479531

Отзывы:

Похожие инструкции для 6479531

Бренды по названию

Популярные бренды