Clarke 6471150, Инструкция по эксплуатации и обслуживанию, Страница: 6 / 16

6
ELECTRICAL CONNECTIONS
Connect this appliance to a 230 Volt, single phase 16 amp electrical supply
through a suitably fused isolator.
WARNING: DO NOT CONNECT TO A DOMESTIC 13 AMP SUPPLY VIA A
13 AMP PLUG.
WARNING! THIS APPLIANCE MUST BE EARTHED
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code.
Green & Yellow...................................Earth
Blue.......................................................Neutral
Brown...................................................Live
• Connect GREEN & YELLOW coloured cord to plug terminal marked
with a letter “E” or Earth symbol “ ” or coloured GREEN or GREEN
& YELLOW.
• Connect BROWN coloured cord to plug terminal marked with a
letter “L” or coloured RED.
• Connect BLUE coloured cord to plug terminal marked with a letter
“N” or coloured BLACK.
We recommend that this machine is connected to the mains supply via a
Residual Current Device (RCD)
If in any doubt, DO NOT attempt any connections or repairs yourself.
Consult a qualified electrician, your local Clarke dealer or Clarke Interna-
tional on:
0208988 7400 or e-mail:Service@clarkeinternational.com
CABLE EXTENSION
Always use an approved extension cable suitable for the power rating of this
tool. The conductor size should be at least the same size as that on the
machine, or larger. When using cable reel always unwind the cable com-
pletely.
If a cable extension is needed, it is essential to comply with the following data
Voltage Extension length Cable section
230v Up to 20m 2.5mm 2
230v From 20 to 50m 4mm 2