Clarke 6470144, Инструкция по эксплуатации и обслуживанию, Страница: 11 / 20

11
Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com
6. Press and hold the spindle lock and use the pin spanner to tighten the
outer flange. Care should be taken also NOT to overtighten.
FITTING THE SIDE HANDLE
1. Fit the side handle by screwing it
into the threaded hole on either
the left or right hand side of the
angle grinder.
OPERATION
WARNING: FRAGMENTS FROM A BROKEN/DETACHED DISC CAN CAUSE
SERIOUS INJURY. ALWAYS WEAR SUITABLE EYE AND FACE PROTECTION.
WARNING: WHEN USING CUTTING DISCS, DO NOT STAND DIRECTLY IN
LINE WITH THE ROTATING DISC.
WARNING: DO NOT PUT SIDEWAYS PRESSURE ON CUTTING DISCS.
WARNING: ENSURE THAT THE WORKING POSITION ADOPTED DOES NOT
CAUSE OPERATOR FATIGUE LEADING TO LOSS OF CONTROL OF THE
CUTTING DISC. ALWAYS WEAR EYE PROTECTION.
WARNING: ENSURE THE INTENDED CUTTING PATH IS CLEAR AND WITH
SUFFICIENT CLEARANCE BETWEEN SURROUNDING OBJECTS.
WARNING: WHEN CUTTING, KEEP THE ANGLE GRINDER STRAIGHT TO
PREVENT SNATCHING OR JAMMING.
THE ON/OFF SWITCH
1. To start the angle grinder, slide the
trigger forwards while pressing the
heel of the button towards the
tool body.
• The grinder will start instantly.
Ensure a firm grip is maintained
with both hands.
2. To stop the angle grinder, release
the trigger.
WARNING: THE DISC WILL CONTINUE TO ROTATE FOR A FEW SECONDS
AFTER THE TRIGGER HAS BEEN RELEASED.