background image

7

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INITIAL BATTERY CHARGING

1. Charge your jump-start battery before using it for the first time.

2. Recharge the jump-start battery after every occasion of use if possible, 

and thereafter, at least every 30 days.

3. Always avoid leaving your jump-start in a discharged state.

FOLLOW THE ABOVE POINTS TO ENSURE MAXIMUM LIFE FROM THE BATTERY

.

Two means of charging the battery are provided:

1. Via a 230V mains electricity 

supply, using the mains adaptor, 
as shown.

2. Via a 12V supply using the vehicle 

cigar lighter adapter with cable 
and plug provided.

NOTE: 

Using a 12V vehicle supply, 

the battery will not charge to 
maximum, but only to 
approx. 50% of its capacity.

NOTE: 

A 5 amp fuse is fitted into the cigarette lighter plug adaptor, 

accessed by unscrewing the end cap of the adaptor. Take care 
not to loose the spring when unscrewing this cap.

CHARGING USING THE 230V MAINS ADAPTOR

1. Plug the cable into the socket at 

the rear of the unit, then plug the 
adaptor into the mains supply 
and switch on.

• The red CHARGING light on the 

jump-start will come on to 
indicate charging is in progress.

2. Continue to charge until the RED 

charging light changes from red 
to green.  It is important to note 
that this could take several days, 
dependant upon the state of 
charge of the battery.

NOTE: 

Pressing the ‘TEST’ voltage 

test switch with the charger 
disconnected, will cause the 

REVERSE

Содержание 6240030

















Отзывы: