background image

3

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

GENERAL SAFETY RULES

1. Always ensure when jump-starting that there is air circulating around the 

machine.

2. Never allow the negative and positive leads on this unit, to touch each 

other or to touch the same metal object.

3. Although the jump-start is water resistant and may be used outdoors, DO 

NOT leave it exposed to the elements. Avoid direct sunlight, direct heat, 
rain/moisture etc.

4. The JS4000 jump-start is designed for use with 12V systems.

5. Do not operate the jump-start if any of the cables are damaged. Consult 

your CLARKE dealer for repair or replacement of the parts.

6. Do not operate the jump-start if the case is damaged. Consult your 

CLARKE dealer or a qualified person for inspection and repair.

7. Ensure the vehicle battery posts and battery clamps are perfectly clean 

before use.

8. When connecting the jump-start leads to a battery, ensure the ON/OFF 

switch is OFF, and ALWAYS connect the RED, (po’) output conductor 
to the UNEARTHED (+) battery terminal FIRST, then connect the BLACK, 
(negative) conductor to a suitable earthing point on the chassis, well away 
from any fuel lines.

9. To prevent the battery overheating and consequent damage, do not 

exceed our recommendations for the duration of jump starting.

10. Always wear suitable protective clothing and eye protection when working 

with lead-acid batteries.

11. The jump-start is NOT designed to be used as a replacement for a vehicle 

battery.

12. DO NOT attempt to BOOST CHARGE the jump-start's sealed battery.

13. Never allow the battery to become completely discharged.

14. Never jump-start the engine whilst the jump-start is being charged.

15. Never allow the cables to become wrapped around the operator or any 

other person.

16. Never attempt any repairs yourself. If you have a problem with the jump-

start contact your local CLARKE dealer.

17. Always keep your body and clothing dry. Never work in damp area without 

adequate insulation against electric shock.

Содержание 6240030

















Отзывы: