6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
• The BLUE charging/indicator lights on
the jump starter will come on and start
flashing to indicate charging is in
progress.
3. Continue to charge until all 4 BLUE
charging lights stop flashing and stay on.
It is important to note that this could take up to 4 hours, dependant upon
the state of charge of the battery.
CHARGING USING A 12V AUXILIARY ADAPTOR
1. Plug the C-type end of the charging
cable into the C-Type port on the Jump
Starter power pack.
2. Plug the USB end of the charging cable
into a USB 12V auxiliary adaptor (not
supplied) and insert the 12V adaptor into
your car 12V auxiliary port.
• The BLUE charging/indicator lights on
the jump starter will come on and start
flashing to indicate charging is in
progress.
3. Continue to charge until all 4 BLUE
charging lights stop flashing and stay on.
It is important to note that this could take
up to 4 hours, dependant upon the state
of charge of the battery.
MAINTENANCE
Always ensure the cables & clamps are in good condition and the clamps are
clean and corrosion free. If damaged they should be replaced. Keep the unit
clean by wiping with a dry cloth.
DO NOT
use solvents as a cleaning agent.
NEVER attempt any repair unless your are a qualified technician. Your CLARKE
jump starter has been designed to give long and trouble free service. If,
however, having followed the instructions in this booklet carefully, you
encounter problems, take the unit to your local CLARKE dealer.