5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
POWER PACK CHARGING
1. Fully charge your jump starter battery unit before using it for the first time.
2. Recharge the jump starter battery unit after every occasion of use if
possible, and thereafter, at least every 6 months.
3.
ALWAYS AVOID
leaving your jump starter unit in a discharged state.
FOLLOW THE ABOVE POINTS TO ENSURE MAXIMUM LIFE FROM THE BATTERY.
BATTERY CAPACITY INDICATOR LIGHTS
Pressing the power switch, the indicator lights will show as follows:
During the charging of the power pack, the power indicator lights will flash
and turn on one by one. When all four lights remain on, it means the unit is fully
charged.
During the discharging of the unit, if the first indicator light is flashing, it means
the unit is short of power and needs recharging.
There are three means of charging the power pack:
1. Via a 230V USB mains adaptor (not supplied), using the USB charging cable
2. Via a PC’s USB terminal, using the USB charging cable.
3. Via a 12V auxiliary vehicle adapter (not supplied), with the USB charging
cable.
CHARGING USING A 230V USB MAINS ADAPTOR OR PC TERMINAL
1. Plug the C-TYpe end of the charging
cable into the C-type port on the Jump
Starter power pack.
2. Plug the USB plug end of the charging
cable into a USB mains adaptor (not
supplied) or a PC’s USB terminal and
switch on.
Indicator Light
1 Light On
2 Lights On
3 Lights On
4 Lights On
Capacity
25%
50%
75%
100%