14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
1. When piercing, tilt the torch so
that blowback particles blow
away from both the operator and
the torch.
2. Complete the piercing off the
cutting line and then continue the
cut onto the line. Hold the torch
perpendicular to the workpiece
after the cut is complete.
3. Clean spatter and scale from the
shield cup and the tip as soon as
possible. Spraying or dipping the
shield cup in anti-spatter
compound will minimize the scale
which adheres to it.
4. Handle torch leads with care and protect them from damage.
SHUTTING OFF THE PLASMA CUTTER
1. To stop cutting, remove the torch from the workpiece and release the
trigger.
NOTE:
When the trigger is released, compressed air will continue to flow
for a short period of time in order to cool the torch. DO NOT switch
off the machine until the air has stopped flowing or damage may
occur to the torch.
2. When finished cutting and the airflow has stopped switch the cutter off
and turn off the air supply.
CAUTION: SPARKS FROM THE CUTTING PROCESS CAN CAUSE DAMAGE
TO COATED, PAINTED AND OTHER SURFACES SUCH AS GLASS, PLASTIC
AND METAL.
Содержание 6015700
Страница 24: ......
