background image

5

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

• Flammable hair sprays/gels should not be used by persons intending to weld 

or cut.

PROTECTIVE CLOTHING

• Wear gauntlet gloves designed for use in welding, 

• Wear an apron and protective shoes.

• Wear cuffless trousers to avoid entry of sparks and slag. 

• Avoid oily, greasy clothing. 

• Protective head and shoulder coverings should be worn when overhead 

welding.

• Wear a welding headshield with appropriate filter lenses or plates 

(protected by clear glass). This is a MUST for welding (and chipping) to 
protect the eyes from radiant energy and splatter. Replace cover glass 
when broken, pitted, or splattered. 

NOTE: ALL protective wear inc. masks & head shields MUST comply with PPE 
Directive 89/686/EEC

ADDITIONAL SAFETY PRECAUTIONS FOR ARC WELDERS

• NEVER attempt to remove any of the exterior panels unless the machine is 

disconnected from the power supply.

• NEVER use the machine with any of the panels removed.

• NEVER attempt any electrical or mechanical repair unless your are a 

qualified technician. If you have a problem with the machine contact your 
local CLARKE dealer.

• NEVER use or store in a wet/damp environment. DO NOT EXPOSE TO RAIN.

• NEVER allow children or animals in the vicinity of a welding operation.

• ALWAYS remove all flammable materials from the welding area.

• ALWAYS ensure that there is full free air circulating around the outer casing of 

the machine, and that the louvres are unobstructed.

• The welding arc can seriously damage your eyes. Both the operator and 

any spectators should always use a proper welding face shield or helmet, 
with suitable filter lenses. Proper gloves and working clothes should be worn 
at all times.

• ALWAYS wear a pair of safety spectacles/goggles when chipping away slag 

after welding. Remember, ordinary eye glasses are not safety gasses.

• ALWAYS ensure there is a fire extinguisher on hand.

• ALWAYS ensure there is adequate ventilation or extraction in the work area, 

as the welding process gives off toxic fumes.

• ALWAYS ensure that a medical supply is on hand, and that treatment for 

burns is available.

Содержание 6012149

























Отзывы: