background image

o

]

4

WARNING:

As with all machinery, there are certain hazards involved with their operation and use.

Exercising respect and caution will considerably lessen the risk of personal injury.

However, if normal safety precautions are overlooked or ignored, personal injury to

the operator or damage to property may result.

ALWAYS READ THE MANUAL.

 Become familiar with the entire operating manual. Learn the

machine’s applications and limitations as well as the specific potential hazards peculiar to it.

ALWAYS CHECK FOR DAMAGED PARTS

. Before use of the machine, it should be checked to

ensure that it will operate properly and perform its intended function. Check for any
condition that may affect its operation. A part that is damaged should be properly repaired
or replaced before the mixer is put into use.

ALWAYS KEEP COVERS AND GUARDS IN PLACE

 and in good condition.

ALWAYS REMOVE TOOLS

 etc. Form habit of checking to ensure that any tools used for adjusting/

repairs, are removed from machine before use.

NEVER 

operate the machine whilst under the influence of 

DRUGS

ALCOHOL 

or any

MEDICATION

.

NEVER STAND ON THE MACHINE

. Injury could occur from a fall.

NEVER LEAVE MACHINE RUNNING UNATTENDED

. Turn the engine OFF.

NEVER 

put your hands inside the drum when it is rotating. Keep your hands well clear of

the rotating drum at all times.

NEVER WEAR JEWELLERY

 or loose clothing that could be snagged by the rotating drum.

DO NOT LOAD THE DRUM WHEN IT IS STATIONARY.

 Always start the engine and ensure the

drum is rotating.

GENERAL SAFETY RULES

CAUTION:   TAKE ALL PRECAUTIONS REGARDING THE USE OF PETROL.

Always 

switch the engine OFF when refuelling.

Always

 refuel away from any source of heat or naked flames.

Always

 refuel in a well ventilated area.

Never

  smoke whilst refuelling.

Never

 start the engine if there is spilled fuel. Any spillage must be wiped clean and

allowed to dry before attempting to start the engine.

WARNING: EXHAUST FUMES CAN KILL

Always 

use in a well ventilated area.

Always 

position the exhaust outlet away from people.

Always 

keep children away from the mixer

Never 

use the mixer indoors or in a confined space.



Содержание 3400820

















Отзывы: