Clarke 2320865, Инструкция по эксплуатации и техническому обслуживанию

Страница: 8 / 20

8
FITTING THE REGULATOR
1. Fit the regulator into position as
shown.
2. Do not overtighten the nut.
ADDING OIL
The compressor is supplied without any oil inside.
1. Remove the oil cap from the top
of the oil filler tube.
2. Pour the oil into the oil filler tube
using the funnel on the bottle,
then replace the oil cap.
• Only use Clarke synthetic
compressor oil, available from
your Clarke dealer (Part No.
3050795).
3. Make sure that the oil level is half
way up the oil sight glass.