3 Installation
Clarity Hardware
3.4.2 Using multiple INT9 converters
When using multiple A/D cards, it will be necessary to add the
INT9
card
again, repeating the entire procedure described in the chapter
"ClarityConfiguration"
on pg
8
. from Step 3.
Fig 7: System Configuration – multiple INT9s
Individual detectors from all cards can be assigned to multiple instruments
and combined together arbitrarily. In this example, all signals from
INT9
A/D Card 1
, as well as all signals from
INT9 A/D Card 2
and one signal
(
Pressure
) from
U- PAD2
are assigned to the
Instrument 1
, while the
second signal (
UV
) from
U-PAD2
is assigned to the
Instrument 2
.
While there are several cards assigned to the same instrument, it is
necessary to select which card will be used for
Ext. Start Dig. Input
and
Ready Dig. Output
signals
.
All added A/D converters (e.g.
INT9
) must have their drivers properly
installed. There must be correct number of items in the Windows OS
Device Manager
, otherwise you will not be able to add it in the
System
Configuration
dialog and configure its detectors to Instruments.
- 11 -
