VX316AU 7
English
English
Owner’s Manual
The operation panel will operate properly in a temperature
range of 0˚ to 60˚ C.
Do not allow any liquids on the set from drinks, umbrellas
etc. Doing so may damage the internal circuitry.
Do not disassemble or modify the set in any way. Doing so
may result in damage.
Subjecting the operation panel to shocks may result in
breakage, deformation or other damage.
Do not let cigarettes burn the display.
If a problem should occur, have the set inspected at your
store of purchase.
The remote control unit may not work if the remote control
sensor is exposed to direct sunlight.
In extremely cold weather, the display movement may
slow down and the display may darken, but this is not a
malfunction. The display will work normally when the tem-
perature increases.
Small black and shiny spots inside the liquid crystal panel
are normal for LCD products.
The USB memory sticks must be recognized as “USB
mass storage class” to work properly. Some models may
not operate correctly.
When the memorized data is lost or damaged by any
chance, Clarion shall not be liable for any damage.
When using an USB memory stick, we recommend that
you backup your data stored on it before by using a per-
sonal computer etc.
Data files may be broken when using USB memory sticks
in the following situation: When disconnecting the USB
memory stick or turning the power off during writing or
reading data. When affected by static electricity or electric
noise. Connect/disconnect the USB memory stick when it
is not accessed.
Connecting with the computer is not covered.
Cleaning the cabinet
Use a soft, dry cloth and gently wipe off the dirt. For tough
dirt, apply some neutral detergent diluted in water to a soft
cloth, wipe off the dirt gently, and then wipe again with a
dry cloth.
Do not use benzene, thinner, car cleaner, etc., as these
substances may damage the cabinet or cause the paint
to peel. Also, leaving rubber or plastic products in contact
with the cabinet for long periods of time may cause stains.
Cleaning the liquid crystal panel
The liquid crystal panel tends to collect dust, so wipe it
off occasionally with a soft cloth. The surface is easily
scratched, so do not rub it with hard objects.
3. CAUTIONS ON HANDLING
Operation Panel
USB Port
Cleaning
For a longer service life, be sure to read the following cautions.
