Clarion VRX815, Руководство по обслуживанию

Страница: 9 / 38

VRX815
VRX815P
- 9 -
to the OSD IC.
pin 38: OSD PS 1 : O : The input/output port number signal output
to the OSD IC.
pin 39: OSD PS 0 : O : The input/output port number signal output
to the OSD IC.
pin 40: NU : - : Not in use.
pin 41: FW_ : IN : The tentative terminal.
pin 42: EEP SI : IN : EEP ROM data intput.
pin 43: EEP SCLK : O : EEP ROM clock output.
pin 44: CD ON_ : IN : CD ON signal output.
pin 45: CD C1 : O : The timing pulse output to the CD mecha-
nism controller.
pin 46: CD RST_ : O : The reset pulse output to the CD mecha-
nism controller.
pin 47: CD CONT : O : Unknown.
pin 48: EJECT OUT_ : O : Eject command output.
pin 49: KI 3 : IN : Key scan signal input.
pin 50: KI 2 : IN : Key scan signal input.
pin 51: KI 1 : IN : Key scan signal input.
pin 52: KI 0 : IN : Key scan signal input.
pin 53: GREEN : O : Green key illumination.
pin 54: AMBER : O : Amber key illumination.
pin 55: BLK LED : O : The blnikng LED control.
pin 56: EJECT SW_ : IN : The eject key signal input.
pin 57: BLK : O : The blank signal output.
pin 58: NV ON : O : "H"= Navigation RGB, "L"= OSD RGB.
pin 59: VIDEO_/RGB : O : Image selection signal output. "H"= RGB.
pin 60: VCC : - : Positive supply voltage.
pin 61: CD PWR ON : O : The CD power ON signal output.
pin 62: GND : - : Ground.
pin 63: MOTOR 2F : O : The motor control signal output.
pin 64: MOTOR 2R : O : The motor control signal output.
pin 65: MOTOR 1F : O : The motor control signal output.
pin 66: MOTOR 1R : O : The motor control signal output.
pin 67: MOT ON : O : Motor ON signal output.
pin 68: MT PW chg2 : O : The motor control signal output.
pin 69: MT PW chg1_ : O : The motor control signal output.
pin 70: NU
: - : Not in use.
pin 71: POWER SW_ : IN : Power/Func switch pulse input.
pin 72: DCP_
: IN : DCP detect signal input.
pin 73: OSD INT0_ : IN : The vertical timing pulse input from the
OSD IC.
pin 74: NU : - : Not in use.
pin 75: ROM EN_ : O : RAM data port control signal output for the
OSD IC.
pin 76: OSD WR_ : O : The write strobe pulse output to the OSD
IC.
pin 77: OSD RST_ : O : The reset pulse output to the OSD IC.
pin 78: OSD WAIT_ : IN : The wait signal input from the OSD IC.
pin 79: OSD CD 7 :I/O: Data input/output terminal for the OSD IC.
pin 80: OSD CD 6 :I/O: Data input/output terminal for the OSD IC.
pin 81: OSD CD 5 :I/O: Data input/output terminal for the OSD IC.
pin 82: OSD CD 4 :I/O: Data input/output terminal for the OSD IC.
pin 83: OSD CD 3 :I/O: Data input/output terminal for the OSD IC.
pin 84: OSD CD 2 :I/O: Data input/output terminal for the OSD IC.
pin 85: OSD CD 1 :I/O: Data input/output terminal for the OSD IC.
pin 86: OSD CD 0 :I/O: Data input/output terminal for the OSD IC.
pin 87: SW DET_ : IN : Switch detection.
pin 88: KO 2 : O : Key scan output terminal.
pin 89: KO 1 : O : Key scan output terminal.
pin 90: KO 0 : O : Key scan output terminal.
pin 91: IR SEL : O : Remote control signal selection. "H"= Op-
tical input. "L"= Micro computer signal out-
put.
pin 92: AD 2 : IN : The input terminal of the internal ADC.
pin 93: AD 1 : IN : The input terminal of the internal ADC.
pin 94: GND : - : Ground.
pin 95: EEP CE : O : The chip enable signal output to the EEP
ROM.
pin 96: Vref : - : Reference voltage
pin 97: +5V : - : +5V.
pin 98: CD SUBC : IN : The CD text data input.
pin 99: NU : - : Not in use.
pin100: CD SBCK : O : The clock pulse output to read the text data
of the CD.