English
Owner’
s manual
0
English
Owner’
s manual
Description
The 2Zone function is a function that outputs separate sounds/images from the MAIN and SUB
Zone (such as the rear monitor) by simultaneously operating two sources in the one center unit.
Thereby, plural listeners are allowed to enjoy separate audio/visual sources. The 2Zone function
allows internal sources (TUNER, DVD, iPod) and external sources (AUX, etc.) to be played on
the MAIN and SUB Zone. Controlling sources of MAIN and SUB Zone can be made from the
main unit and from the remote control unit. The source sounds of the MAIN zone are played
back from the speakers positioned at the sides of the vehicle, and those of the SUB zone are
from the wireless headphone. Sound volume control on the SUB Zone is performed by wireless
headphone. When you run the units for the first time, 2Zone function is set to the OFF, both of
the MAIN and SUB Zone are set to the MAIN source.
■
The TUNER mode cannot be specified for the SUB Zone.
■
The steering wheel remote control operations work upon the MAIN Zone even when the SUB
Zone is selected.
■
If a mobile phone interrupt arises when an external equipment is specified for the SUB zone,
the 2-ZONE function is automatically turned off and does not resume the 2-ZONE ON status
even when the interruption is finished.
■
You cannot switch the MAIN and SUB Zone when the front monitor locked screen or CCD
camera screen is displayed.
■
The ON/OFF of the 2Zone keeps up regardless of the engine or power ON/OFF.
Display
To display the 2-ZONE mode screen, press the [
♪
] button for more than 2 seconds. Select the
desired source. (2-ZONE mode : DVD(CD/MP3), AUX, iPod, OFF)
※
3
DVD
VIsUAL(AUX)
※
2
iPod
(VIDEO)
RADIO
UsB
RADIO
※
1
Y
※
1 Y
※
1
Y
N
N
DVD
Y
Y
Y
N
N
VIsUAL(AUX)
Y
Y
N
N
N
iPod
Y
Y
Y
N
N
UsB
Y
Y
Y
N
N
MAIN
SUB
NOTE
※
1 : Receiving condition of some stations may be altered in the 2Zone mode.
※
2 : To select the VIDEO mode of a iPod when you watch in the SUB Zone.
※
3 : DVD operation can be done only in the MAIN Zone.
specification of Conversion
■
When the 2Zone function is turned on, the source of the MAIN and SUB Zone is made up of
the mixture besides of the external source.
■
The source conversion of the MAIN Zone is available when the 2Zone setting mode sets up
to the MAIN Zone.
■
The source conversion of the SUB Zone is available when the 2Zone setting mode sets up to
the MAIN Zone.
■
The source conversion of the MAIN Zone and SUB Zone is as like below.
2Zone Operations
※
3 DVD VISUAL(AUX)
※
iPod (VIDEO) RADIO USB
hUE
■
To adjust the tone of color
■
Press the [
|
◀◀
] button to increase the red.
■
Press the [
▶▶
|
] button to decrease the green.
■
This function enables to adjust the value on the VIDEO-play/DVD MODE/ AUX MODE/ iPod
VIDEO MODE. Only when the NTSC mode is selected, this function can be adjusted.
2. gENERAL
Press and hold the [OPT ] button for than 2 seconds, then select "GENERAL" item.
CLOCK
■
To set up the time, choose the [ADJUST] value and press the [ENT] button.
■
Adjust the value (AM, PM, HOUR, MINUTE) by pressing the [
|
◀◀
] or [
▶▶
|
] button.
BEEP
■
The sound heard when you press the button is called BEEP.
■
ON : To turn the BEEP sound on
■
OFF : To turn the BEEP sound off (In spite of "OFF" setting, the WARNING BEEP sound
comes out.)
■
When memorizing, the BEEP sounds longer.
TEL sWITCh
■
To set up the mobile phone interruption
■
When you connect your mobile phone to this unit using a separately sold cable, you can listen
to your telephone calls on your car speakers.
■
ON : To listen to your telephone calls from the speakers connected to this unit
(When listening to your car speakers, you can adjust the volume level.)
■
OFF : To continue normal operation even when you use the telephone calls (When you set
this function to OFF, disconnect the mobile phone from the cable or turn off the power
of the mobile phone.)
■
MUTE : To mute the sound during your telephone calls (This function is not compatible with
all mobile telephones. Contact your local authorized Clarion dealer for information on
proper installation and compatibility.)
TEL sPEAKER
■
To change the output speaker for the mobile phone
■
To output the telephone calls, set the above "TEL SWITCH" item to ON.
■
During mobile phone interruption, settings of this function is set to disabled.
■
LEFT : To hear your telephone calls from the left speaker connected to this unit
■
RIGHT : To hear your telephone calls from the right speaker connected to this unit
