English
Owner’
s manual
English
Owner’
s manual
■
Press the [SRC] button to change operation mode when the control panel is open/closed.
■
Each time you press the [SRC] button, the operation mode changes in the following order:
TUNER mode
→
DVD(CD/MP3) Play mode
→
UsB mode or iPod mode
→
AUX mode
■
When the 2Zone function is turned on, the [SRC] button will operate only for the MAIN Zone.
To switch to the SUB Zone source. Use the [
♪
] button or [2Zone] button on the remote
control unit.
Mode selections
■
Cautions
To prevent the battery from becoming completely discharged, operate this unit with the engine
running whenever possible. When the control panel is operating, be careful not to get your
hands or fingers caught in between the control panel and the main unit. Do not move the control
panel by hand.
■
Opening the control panel
①
Press and hold the [SRC] button for more than 2 seconds to turn the power on.
②
Press the [TILT] button for more than 2 seconds. The control panel comes out toward you.
Control Panel
■
Adjusting the angle of the control panel
Each press of the [TILT] button tilts the control panel forward or backward.
■
Closing the control panel
Press the [TILT] button more than 2 seconds. The control panel is automatically housed. If
you do not use the unit for a prolonged period oftime or leave the car, please house the control
panel.
※
OPEN or CLOSE function might not work properly if ACC is off while opening or closing the control
panel or if moved by manually.
7. OPERATIONs
DCP Operations
The control panel can be detached to prevent theft. When detaching the control panel, store it in the
DCP (Detachable Control Panel) case to prevent scratches. Please take the DCP with you when
leaving the car.
Remove DCP
①
When the control panel is open
Keep pressing the [RELEASE] button on the back of the DCP and pull the front side of the
DCP toward you, and remove it.
Attach DCP
①
Hook the left side of the DCP.
②
Press the right sides of the DCP with force.
Cautions
■
The DCP can easily be damaged by impact. After removing it, be careful not to drop or give
impact.
■
Remote control unit cannot be used when the DCP is removed.
■
If the DCP is dirty, wipe it off by using a soft dry cloth.
Basic Operations
※
When the unit is turned on, starting and stopping the engine with the volume raised to
maximum level may harm your hearing. Be careful when adjusting the volume. Be careful
whenusing this unit for prolonged periods of time without running the engine. If the car battery
is discharged to excessive levels, you may not be able to start the engine and can reduce the
service life of the battery.
■
Start the engine before using this unit. The illuminations on this unit will light up.
■
Press and hold the [SRC] button for more than 2 seconds to turn the power on. To open the
Control panel, press the [TILT] button more than a second. The last mode screen is displayed.
■
Press and hold the [SRC] button for more than 2 seconds to turn the power off.
POWER ON/OFF
PUsh
