background image

22

Full trigger response 

30

or 60 seconds: This determines how

long the full triggered sequence lasts. Some states have laws

regulating how long a security system can sound before it is

considered a nuisance. If your installer is programming the

security system with the Pro Security Programmer, the full

triggered response can be programmed for any duration

ranging from 1 to 180 seconds.

False alarm prevention Circuitry 

on

or off: Please refer to the

false alarm prevention circuitry section of this manual for a

further explanation. If the false alarm prevention circuitry is

programmed off, the security system will respond to inputs

from any sensor indefinitely.

Progressive door trigger 

on

or off: When the system is armed

and a door is opened, the system responds with ten chirps prior

to beginning the full triggered sequence. If an instant trigger is

desired, the progressive door trigger can be programmed off.

Override pulse count: The number of presses of the Override

switch required to disarm the security system, AED, or the

Anti-Carjacking system can be programmed from one to five

presses. The default setting is 

one

press.

Siren tones and chirp volume: The output of the siren consists

nnoottee:: Because many states have laws regulating security sys-
tems, programming false alarm prevention circuitry off may
cause your system to violate state laws.

nnoottee:: This feature will only function if the Starter Kill relay has
been installed.

Содержание UNGO ProSecurity S100





































Отзывы: