English
20
NX502E
Note:
*1 Connect to the AUX audio input terminal and the iPod video input terminal. (Audio connection
is required only when [Analog] is selected for the iPod output signal. See Owner’s Manual.)
*2 In certain vehicles - Volkswagen/Opel/Vauxhall - it is necessary to exchange the accessory
<<Red>> and the main power <<Yellow>> connection, to avoid overload and loss of memory.
*3 When the unit is installed in a 1998 or later Volkswagen model, make sure to interrupt the
<<Remote>> output.
Disconnect the <<blue/white>> wire and insulate the front ends of this cord. A breakdown may
occur if the cord is not disconnected, or front ends are not insulated.
Installation Guide
Connecting the parking brake cord
Connect the cord to parking brake lamp ground in the meter panel.
Note:
• Connecting the parking brake cord to lamp ground allows you to watch video images when
the parking brake is engaged.
• When the parking brake cord is not connected, the monitor will not display video images.
Parking brake lamp
cord to battery
Parking brake
Electro-tap
Parking brake signal cord
Parking brake cord (Grass-green)
Parking brake signal cord
Stopper
Parking brake cord (Grass-green)
Интернет-магазин автозвука и автотоваров Винавто
winauto.ua
