PROFESSIONAL FIRMWARE VERSION
2013
14
3.1.5 Wireless setup (Only for terminals with WI-FI)
Before the device is used for wireless network, other physical groupware of 802.11
networks, such as joint, distributing system, wireless medium must be in existence.
ESSID to connect to the network must be known (network ID).
Network ID: Network ID to be connected to wireless network. (There is difference
between small letter and capital letter.)
Network model: there are two models: infrastructure model (for star structure) and
ad
－
hoc model (for peer-to-peer-network).
Authentication mode: Infrastructure mode includes five authentication modes: OPEN,
SHARED, WEPAUTO, WPAPSK and WPA2PS002E.
Ad
－
hoc model includes four authentication modes: OPEN, SHARED, WEPAUTO and
WPANONE.
Encrypt type: when the selected encrypt type is NONE, the password in WEP (Wired
equivalent privacy) and WPA (Wi-Fi protested access) cannot be edited, namely, it is
not necessary to input password.
Device IP address: In 802.11 wireless networks, there is DHCP. Or enter IP interface to
input correct IP address, subnet mask and so on.
