Clarion DXZ748RMP, Руководство пользователя

Страница: 23 / 40

280-8001-01
DXZ748RMP
27
English
Operations Common to Each Mode
Dimmer level
You can adjust the reduced illumination level of
the dimmer.
∗ The factory default setting is “ LV3 ”. (Adjustment
range: LV1 to LV5)
1. Press and hold the [ T ] button for 1 second
or longer to switch to the adjustment selec-
tion display.
2. Press the [
a
] or [
d
] button to select
“
Å
DIMMER LV
Î
”.
3. Turn the [ ROTARY ] knob clockwise or coun-
terclockwise to adjust the reduced illumina-
tion level of the dimmer.
●
LV1 to LV5:
The dimmer operation is performed depend-
ing on the set level LV1 to LV5.
●
OFF:
No dimmer operation is performed.
4. Press the [ T ] button to return to the previous
mode.
Dimmer in control
You can setting the dimmer in control AUTO or
ILLUMI.
∗ The factory default setting is “ AUTO ”.
1. Press and hold the [ T ] button for 1 second
or longer to switch to the adjustment selec-
tion display.
2. Press the [
a
] or [
d
] button to select
“
Å Å Å Å Å
DIMMER IN
Î Î Î Î Î
”.
3. Turn the [ ROTARY ] knob clockwise or coun-
terclockwise and select “ AUTO ” or “ ILLM ”.
4. Press the [ T ] button to return to the previous
mode.
Selecting the CONTRAST mode
∗ The factory default setting is “ 8 ”.
1. Press and hold the button [ T ] for 1 second
or longer to switch to the adjustment selec-
tion display.
2. Press the [
a
] or [
d
] button to select
“
Å Å Å Å Å
CONTRAST
Î Î Î Î Î
”.
3. Turn the [ ROTARY ] knob to select from 1-
18.
4. Press the [ T ] button to return to the previous
mode.
Anti-theft indicator
The red Anti-theft indicator is a function for pre-
venting theft. When the DCP is removed from
the unit, this indicator blinks.
∗
The factory default setting is “ OFF ”.
1. Press and hold the [ T ] button for 1 second or
longer to switch to the adjustment selection display.
2. Press the [
a
] or [
d
] button and select
“
Å Å Å Å Å
BLINK LED
Î Î Î Î Î
”.
3. Turn the [ ROTARY ] knob clockwise to set this
function “ ON ” or turn it counterclockwise to
switch this function “ OFF ”.
4. Press the [ T ] button to return to the previous mode.
Setting RDS interrupt
You can set RDS mode interrupt (TA, PTY) for
the 2-ZONE function.
∗ The factory default setting is “ ON ”.
1. Press and hold the [ T ] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [
a
] or [
d
] button and select
“
Å Å
Å Å
Å
RDS-INT2Z
Î Î
Î Î
Î
”.
3. Turn the [ ROTARY ] knob clockwise or coun-
terclockwise and select “ ON ” or “ OFF ”.
●
ON:
RDS interrupt is effective.
●
OFF:
RDS interrupt is ineffective.
Note:
• If Radio mode is selected when TA (Traffic An-
nouncement) and PTY are turned “ ON ”, the inter-
rupts are received even if RDS Interrupt is turned
“
OFF ”.
4. Press the [ T ] button to return to the previous mode.
Setting the external amplifier
∗ The factory default setting is “ OFF ”.
1. Press and hold the [ T ] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [
a
] or [
d
] button and select
“
Å Å Å Å Å
AMP-CANCL
Î Î Î Î Î
”.
3. Turn the [ ROTARY ] knob clockwise or coun-
terclockwise and select “ ON ” or “ OFF ”.
●
ON:
Use with connected AMP.
●
OFF:
Use with inside AMP.
4. Press the [ T ] button to return to the previous mode.
+DXZ748RMP-009-ENG 1/14/04, 11:02 AM 27