Clarion DXZ546MP, Руководство пользователя

Страница: 18 / 26

22
DXZ546MP
280-8009-00
English
Operations Common to Each Mode
1. Press and hold the [ T ] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [
a
] or [
d
] button to select
“ DIMMER ”.
3. Turn the [ ROTARY ] knob clockwise to “ ON ”
or counterclockwise to “ OFF ”.
4. Press the [ T ] button to return to the previous
mode.
Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
∗
The factory default setting is “ 8 ”. (Adjustment level:
1 to 16)
1. Press and hold the [ T ] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [
a
] or [
d
] button to select
“ CONTRAST ”.
3. Turn the [ ROTARY ] knob clockwise or coun-
terclockwise to adjust the contrast.
4. Press the [ T ] button to return to the previous
mode.
Setting LOW PASS FILTER
∗
The factory default setting is “ LPF 120Hz ”.
1. Press and hold the [ T ] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [
a
] or [
d
] button to select
“SUB-W LPF” .
3. Turn the [ ROTARY ] knob clockwise or coun-
terclockwise to select the setting. Each time
you turn the [
ROTARY ] knob, the setting
changes in the following order:
LPF REAR
➜
LPF 50Hz
➜
LPF 80Hz
➜
LPF 120Hz
4. Press the [ T ] button to return to the previous
mode.
Selecting AUX IN sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
∗
The factory default setting is “ MID ”.
1. Press and hold the [ T ] button for 1 second or
longer to switch to the adjustment selection
display.
7. Turn the [ ROTARY ] knob to select the de-
sired character.
8. Repeat step 5 to 7 to enter up to 30 charac-
ters for message.
9. Press and hold the [ ] button for 2 sec-
onds or longer to store the message in
memory and cancel input message.
10.Press the [ T ] button to return to the previous
mode.
Message display
When the unit is powered on or off, a message
is displayed. The user can turn this message
display ON or OFF.
∗
The factory default setting is “ ON ”.
1. Press and hold the [ T ] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [
a
] or [
d
] button to select
“ MESSAGE ”.
3. Turn the [ ROTARY ] knob clockwise or counter-
clockwise to set the message display ON or
OFF.
4. Press the [ T ] button to return to the previous
mode.
Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA Title.
∗
The factory default setting is “ ON ”.
1. Press and hold the [ T ] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [
a
] or [
d
] button to select
“ AUTO SCRL” .
3. Turn the [ ROTARY ] knob clockwise or coun-
terclockwise and select “ ON ” or “ OFF ”.
●
ON:
To scroll automatically.
●
OFF:
To scroll just 1 time when the title was
changed or the title key was pressed.
4. Press the [ T ] button to return to the previous
mode.
Dimmer control
You can set the dimmer control “ ON ” or “ OFF ”.
∗
The factory default setting is “ ON ”.
+DXZ546MP-009-ENG 03.12.26, 4:48 PM Page 22 Adobe PageMaker 6.5J/PPC