DRZ9255
25
English
24
DRZ9255
English
CD changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a
total of 2 changers.
Press the [
FUNC
] button and select the CD
changer mode to start play. If 2 CD changers
are connected, press the [
FUNC
] button to
select the CD changer for play.
∗
If “
NO MAG
” appears in the display, insert the
magazine into the CD changer. “
DISC CHK
” appears
in the display while the player loads (checks) the
magazine.
∗
If “
NO DISC
” appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
Note:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
CD Changer Operations
7. OPERATIONS OF ACCESSORIES
CAUTION
CD-ROM discs cannot be played from every
CD changer, it depends on the model.
Pausing play
1. Press the [
s
] button to pause play.
“
PAUSE
” appears in the display.
2. To resume play, press the [
s
] button again.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
∗
Title data for CD-text CDs can be displayed with
this unit only when it is connected to CDC655Tz.
●
When connected to DCZ625 or CDC1255z.
Press the [
DISP
] button to display the title.
●
When connected to CDC655Tz
1. Press the [
DISP
] button to display the title.
2. Each time you press and hold the [
DISP
]
button for 1 second or longer, the title display
changes in the following order:
CD-text title (disc)
➜
Artist name
➜
CD-text title
(track) …
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, “
NO TITLE
” appears in the
display.
• If a CD-text CD is not input its disc title or a track
title, “
NO TITLE
” appears in the display.
Procedure to scroll a title
1. Press and hold the [
ADJ
] button for 1 second
or longer.
2. The title is scrolled.
Selecting a CD
1. Press the [
UP
] or [
DOWN
] button to select
the desired disc.
∗
If a CD is not loaded in a slot of magazine,
pressing the [
UP
] or [
DOWN
] buton can not
work.
Setting the input level for portable
audio (AUX SENS)
This unit is provided with two AUX input lines.
The input level for third-party portable audio
connected to each of these lines can be set.
* The factory default setting is "
MID
".
1. Press the [
ADJ
] button.
2. Press the [
] or [
] button to select "
AUX
SENS
".
3. Press the [
s
] button.
4. Press the [ ] or [ ] button to select the input
line.
Each press of the button switches the line as
follows:
AUX1 SENS: Input line 1
AUX2 SENS: Input line 2
5 Press the [
] button.
6. Press the [ ] or [ ] button to select "
HIGH
",
"
MID
" or "
LOW
".
7. When you select this, press the [
] button
to return to the screen in step 4.
8. Repeat steps 4 to 7 to set the input level of
each input line.
9. Press the [
ADJ
] button to return to the
previous mode.
Setting the digital output (D-OUT)
Set digital output ON when the digital output
connector is used as the digital output
connector of the built-in CD. There is no output
when "
OFF
" is set.
∗
This item cannot be set when a CD changer is
connected via the CeNET cable.
* The factory default setting is "
OFF
".
1. Press the [
ADJ
] button.
2. Press the [
] or [
] button to select "
D-
OUT
".
3. Press the [ ] or [ ] button to select "
ON
" or
"
OFF
".
4. Press the [
ADJ
] button to return to the
previous mode.
Setting the anti-theft indicator
(BLINK LED)
This function makes the indicator of Pch6 blink
(red) when ACC is OFF to create a visual anti-
theft effect.
* The factory default setting is "
OFF
".
1. Press the [
ADJ
] button.
2. Press the [
] or [
] button to select
"
BLINK-LED
".
3. Press the [ ] or [ ] button to select "
ON
" or
"
OFF
".
4. Press the [
ADJ
] button to return to the
previous mode.
Setting the beep tone during button
operation (BEEP)
A high-pitched beep tone is emitted when you
operate a button. This beep output can be
disabled.
* The factory default setting is "
ON
".
1. Press the [
ADJ
] button.
2. Press the [
] or [
] button to select
"
BEEP
".
3. Press the [ ] or [ ] button to select "
ON
" or
"
OFF
".
4. Press the [
ADJ
] button to return to the
previous mode.
Operations Common to Each Mode
