DRZ9255
21
English
20
DRZ9255
English
About gain (G)
This function allows you to adjust how much the
output level is to be lowered.
●
Characteristics during gain adjustment
0dB
-24dB
SUB-WOOFER
LOW
MID
HIGH
About phase (PHASE)
The factory default setting is "
NOR
" (forward
phase). Try switching between "
NOR
" (forward
phase) and "
REV
" (reverse phase) and select
the setting that sounds most natural to you.
Adjusting the position (TIME ALIGN)
●
About the time alignment function
This function allows you to adjust the speakers
so that any listener in the car can obtain the
same sound effect from the speakers.
∗
This item can be adjusted when the Audio mode is
the Standard mode or the Multi mode.
1. Press the [
ADJ
] button.
2. Press the [
] or [
] button to select
"
SOUND
".
3. Press the [
s
] button.
4. Press the [ ] or [ ] button to select "
TIME
ALIGN
".
5. Press the [
] or [
] button to select "
FRONT
" or "
HIGH
".
∗
Select "
FRONT
" when the Audio
mode is the Standard mode, and "
HIGH
" when the Audio mode is the Multi mode.
6. Press the [ ] or [ ] button to select the
speaker to adjust.
* The mute function of a selected speaker can
be turned ON/OFF by pressing the [
ROTARY
]
knob while the speaker is selected.
Each press of the button switches the setting as
follows.
Operations Common to Each Mode
In the Standard mode:
FRONT
FRONT
FRONT
FRONT
REAR
REAR
SUB-W
SUB-W
7. Press the [
] button. The setting value is
displayed.
8. Press the [
s
] button. The setting value
blinks.
9. Press the [ ] or [ ] button to set the
distance from the speaker up to the listener.
∗
The adjustment range is 0 cm to 512.4 cm (in
about 0.7 cm steps).
∗
The range can be adjusted in about 7 cm
steps by holding down the [
] or [ ] buttons.
∗
For details, see "Appendix : Time Alignment
List" (page 32).
10.When you have finished the adjustment,
press the [
s
] button to return to the
screen in step 7. This sets the setting value.
11.Press the [
] button to return to the screen
in step 6.
12.Repeat steps 6 to 11 to adjust the position of
each speaker.
13.Press the [
ADJ
] button to return to the
previous mode.
Operations Common to Each Mode
Blinking
In the Multi mode:
HIGH
HIGH
MID
MID
LOW
LOW
SUB-W
SUB-W
Adjusting P.EQ
●
About P.EQ (Parametric Equalizer)
This function allows you to correct in detail all
frequency levels by a smooth curve by correcting
frequencies matched to the type of your car.
∗
This can be adjusted when the Equalizer mode is
set to "
P.EQ
".
∗
This can be adjusted when the Audio mode is the
Standard mode or the Multi mode.
1. Press the [
ADJ
] button.
2. Press the [
] or [
] button to select
"
SOUND
".
3. Press the [
s
] button.
4. Press the [ ] or [ ] button to select "
P.EQ
".
5. Press the [
] button.
6. Press the [ ] or [ ] button to select the
adjustment item.
∗
Pressing the [
ROTARY
] knob while the L/R channel
is selected turns the mute function of the selected
channel ON/OFF.
Each press of the button switches the setting as
follows.
P.EQ ON/OFF: ON/OFF
P.EQ LEFT/RIGHT: Left channel/Right channel
BAND: band (1 to 5)
fo: frequency (BAND 1,2,3 : 50 Hz to 20 kHz)
G: gain (-12 dB to +12 dB)
Q: Q-curve (0.5 to 12.0)
C: copy
(BAND 4,5 : 630 Hz to 20 kHz)
7. Press the [
s
] button. The setting value
blinks.
8. Press the [ ] or [ ] button to adjust the
setting.
9. When you have finished the adjustment,
press the [
s
] button to return to the
screen in step 6. This sets the setting value.
10.Repeat steps 6 to 9 to adjust each of the
adjustment items.
11.Press the [
ADJ
] button to return to the
previous mode.
