Clarion CZ109EL, Руководство пользователя

Страница: 10 / 92

E
nglis
h
10
CZ109EL
●
Setting the TA standby mode
If you press the [ TA ] button when only
“ TP
”
appears in the display, “
TP
” and “ TA ” appear in
the display and the unit is set into the TA
standby mode until a traffic announcement is
broadcast. When a traffic announcement
broadcast starts, “
TRA INFO ” appears in the
display. If you press the [ TA ] button while a
traffic announcement broadcast is being
received, the traffic announcement broadcast
reception is cancelled and the unit goes into the
TA standby mode.
●
Cancelling the TA standby mode
As “ TP ” and “ TA ” appears in the display, press
the [
TA
] button. The “
TA
” in the display goes off
and the TA standby mode is cancelled.
∗
If “ TP ” is not appeared, pressing the [ TA ] button
searches for a TP station.
●
Searching for a TP station
When
“ TP
” is not appeared, if you press the [ TA ]
button, “ TA ” appears in the display and the unit
automatically receives a TP station.
Auto store function for TP stations
You can automatically store up to 6 TP stations
into preset memory. If the number of TP can be
received less than 6, broadcast stations already
stored in memory and left without being
overwritten.
As “ TA ” appears in the display, press and hold
the [ ] button (2 sec.). The TP stations with
the good reception sensitivity are stored into
preset memory.
∗
Even if you select FM1 or FM2, a TP station is
stored in memory for FM3.
PTY (Programme Type)
This function enables you to listen to a
broadcast of the selected programme type even
if the unit is on a function mode other than radio.
∗
Some countries do not yet have PTY broadcast.
∗
In the TA standby mode, a TP station has priority
over a PTY broadcast station.
∗
The factory default setting is “ OFF ”.
1. Press and hold the [ DISP ] button (1 sec.) to
switch to the RDS adjustment selection
display.
2. Press [
x
] or [
v
] to select “ PTY ”.
3. Turn the [ ROTARY ] knob to select “ ON ” or
“ OFF ”.
• ON:
“ PTY ” appears in the display and PTY
standby mode is enabled. When the selected
PTY broadcast starts, the PTY item name
appears in the display.
• OFF:
“ PTY ” turns off in the display and PTY
standby mode is cancelled.
4. Press the [ DISP ] button to return to the
previous mode.
●
Cancelling a PTY interrupt broadcast
Press the [ SRC ] button during the PTY interrupt
broadcast, the PTY interrupt is cancelled and
the unit returns to PTY standby mode.
S electing PTY
1. Press and hold the [ DISP ] button (1 sec.) to
switch to the RDS adjustment selection
display.
2. Press [
x
] or [
v
] to select “ PTY SEL ”.
3. Press the [ ] button.
4. Press any of the [ DIRECT ] buttons.
Alternatively, turn the [ ROTARY ] knob to
select the desired PTY.
5. Press the [ DISP ] button to return to the
previous mode.
∗
6 types of PTY are stored for the [ DIRECT ]
buttons.
∗
The PTY select mode is cancelled
automatically 7 seconds after a PTY is
selected.
PTY seek
1. Press and hold the [ DISP ] button (1 sec.) to
switch to the RDS adjustment selection
display.
2. Press [
x
] or [
v
] to select “
PTY SEL
”.
3. Press the [ ] button.
4. Press the [
v
] button to search for a PTY
broadcast in the direction of higher
frequencies; press the [
x
] button to search
in the direction of lower frequencies.
∗
If no station with the selected PTY broadcast
can be received, the unit returns to the PTY
select mode.
01_CZ109EL_ENG.book Page 10 Thursday, May 21, 2009 5:05 PM