Clarion AUTOPC 310C, Руководство пользователя

Страница: 5 / 174

Clarion AutoPC Owner’s Manual
v
Precautions continued
Opening the DCP
Grip the control panel as shown in the
illustration which follows, and pull it
outward and downward in one
continuous motion.
Closing the DCP
Place your index finger immediately
below the Start button, pressing inward
and upward as shown below.
Proper clearance to eject CD
Open the control panel to the lowest
position to allow the CD to be ejected
without causing damage.
Before pressing the eject button, look
to see that the CD will clear the top of
the control panel as illustrated below.
Note: If the CD is not manually
removed within approximately 10
seconds after the eject button is
pressed, the CD will be automatically
loaded back into the CD Player.
CD ROM Installation
The vehicle should be parked at a
level location when a higher version of
OS or CD ROM software is installed.
Note: If a vehicle starts up or cranks
up, or if the ACC (accessory) is turned
on or off during the installation, voltage
fluctuation harmful to this unit may
occur. This could result in an
abnormal installation or a malfunction
in the unit.
Power On at time of initial operation
It may take up to 15 seconds to see an
actual display on the unit when it is
initially powered up. This is not a
malfunction.
Correct
clearance