Clare Controls CM-MT6610-BT-70, Руководство пользователя

Страница: 9 / 40

HDBaseT 6x6 Matrix Switcher User Guide 3
Rear panel
Figure 2: Rear panel
(1) INPUTS a.
IR OUT:
Connect with IR transmitter, six in total, to send out the IR
signal from the HDBaseT port of the far-end receiver. These IR OUTs
make up an IR switcher with the IR INs on the HDBaseT receivers, and
all can be switched synchronously with the AV signal, or separately
switching.
b. HDMI: HDMI input ports, six in total, type A female HDMI connector,
connect with HDMI input source devices.
(2) OUTPUTS c. IR IN: Connect with IR receiver, fixed IR input for the output, cannot
be switched separately. It makes up an IR bi-directional transmission
with the IR OUT on the corresponding HDBaseT receiver.
d. RS232: RS232 port to communicate with the RS232 port on
corresponding HDBaseT receiver. When controlled by HDBaseT
receiver, the communication protocol must be the same with the
switcher.
e. AUDIO : stereo analog output ports, six in total.
f. HDMI : HDMI output port, for HDMI inputs 1 to 3. To split HDMI output
for local monitoring or used instead of HDBaseT outputs.
g. HDBaseT : Works with receivers using HDBaseT technology, such as
the HDMI CAT5 cable receiver and the HDMI POH (Power Over
HDBaseT) twisted pair receiver. It can pass through AV, IR, and RS232
signals up to 70 meters.
(d)
(e)
(f)
(g)
(3)
(4)
(5)
(7)
(8)
(1)
(2)
(6) (9)
(a)
(c)
IR IN
1
OUTPUT1
H
D
M
I
H
D
Bas
eT
RS232 AUDIO
TX
R
X
L
R
IR IN
2
OUTPUT2
H
D
M
I
H
D
Bas
eT
RS232 AUDIO
TX
R
X
L
R
IR IN
3
OUTPUT3
H
D
M
I
H
D
Bas
eT
RS232 AUDIO
TX
R
X
L
R
IR IN
4
OUTPUT4
H
D
Bas
eT
RS232 AUDIO
TX
R
X
L
R
5
OUTPUT5
H
D
Bas
eT
RS232
TX
R
X
IR IN
AUDIO
L
R
IR IN
6
OUTPUT6
H
D
Bas
eT
RS232 AUDIO
TX
R
X
L
R R
S23
2
IR
ALL
IN
TC
P/
IP
IR
EYE
1 2
INPUT
H
D
M
I 1
H
D
M
I 2
1 2
INPUT
H
D
M
I 1
H
D
M
I 2
IR OUT
1 2
INPUT
H
D
M
I 1
H
D
M
I 2
IR OUT