Clare Controls CM-MT6610-BT-70, Руководство пользователя

Страница: 32 / 40

26 HDBaseT 6x6 Matrix Switcher User Guide
To connect to a LAN:
1. Connect the TCP/IP port of the switcher to Ethernet port of PC using a Cat5e
cable.
2. Set the PC’s IP address and gateway to the same IP section as the switcher.
Note the PC’s original IP address and gateway.
3. Set the switcher’s IP address and gateway to the same IP section as the router.
4. Set the PC’s IP address and gateway as the original one.
5. Connect the switcher and PC(s) to the router. In the same LAN, each PC is able
to control the switcher asynchronously.
TCP/IP settings
1. Connect the TCP/IP port of the switcher to Ethernet port of the PC with twisted
pair.
2. Set the PC’s IP and gateway to the same IP subnet as the default IP of the
switcher (192.168.0.178).
3. Launch your web browser, and then enter 192.168.0.178 .
This is the default IP address for all Clare Controls HDMI switchers.
4. The Web Interface Login page displays. Enter the user name “clareadmin” and
password “secure7”, and then click
Login
.
5. Select the Network tab and set the following parameters.
 IP address
 Subnet
 Gateway