Clare Controls CM-MT6610-BT-70, Руководство пользователя

Страница: 10 / 40

4 HDBaseT 6x6 Matrix Switcher User Guide
(3) RS232 The serial port for unit control, 9-pin female connector, needs a straight
through cable and connects with control devices, such as a PC.
(4) IR ALL IN IR control signal input port, connect with IR receiver, pass through all
the HDBaseT ports (regardless of the selected input/output) to control
remote devices.
(5) TCP/IP RJ45 port for unit control.
(6) IR EYE Connects with the extended IR receiver. Used to extend the IR control of
the switcher functions.
(7) Power Press the button to power the switcher. The indicator turns red and
remains on when the power is on.
(8) Power supply Connects with 110 to 240 VAC power adapter.
(9) GROUND Connects to ground.
Connecting with the RS232 communication port
You can control the switcher from the front panel, IR, or RS232. RS232 control is
used via the rear RS232 communication port. It is a female 9-pin D connector. The
pin definitions are listed in the table below.
Table 1: RS232 connection definitions
No. Pin Function
1 N/u Unused
2 Tx Transmit
3 Rx Receive
4 N/u Unused
5 Gnd Ground
6 N/u Unused
7 N/u Unused
8 N/u Unused
9 N/u Unused