Clare Controls CM-MT4410-BT-70, Руководство пользователя

Страница: 34 / 44

26 HDBaseT 4x4 Matrix Switcher User Guide
Connecting by PCs in a LAN
You can connect the switcher to PCs so that it can be controlled in a LAN. Ensure the
switcher’s IP section is the same as the router.
Figure 16: Connecting to a LAN
To connect to a LAN:
1. Connect the TCP/IP port of the switcher to an Ethernet port on your router using a
Cat5e cable.
2. Set the PC’s IP address and gateway to the same IP section as the switcher. Note
the PC’s original IP address and gateway.
3. Set the switcher’s IP address and gateway to the same IP section as the router.
4. Set the PC’s IP address and gateway as the original one.
5. Connect the PC(s) to the router. In the same LAN, each PC is able to control the
switcher asynchronously.
To connect the switcher to the PC:
1. Connect the TCP/IP port of the switcher to Ethernet port on the PC with a twisted
pair.
2. Set the PC’s IP and gateway to the same IP subnet as the default IP of the
switcher (192.168.0.178).
3. Launch your web browser, and then enter 192.168.0.178 .
This is the default IP address for all Clare Controls HDMI switchers.
4. When the Web Interface Login page displays, enter the password “secure7”, and
then click Login .