Clare Controls CM-MT4410-BT-70, Руководство пользователя

Страница: 20 / 44

12 HDBaseT 4x4 Matrix Switcher User Guide
Convert an input to all.
Example: Convert Input 1 to all outputs.
Operation: Press 1 + SELECT
Note: Each button flashes three times, and then extinguishes. Should the operation
fail, the light extinguishes immediately.
Learn EDID data
Learn EDID data from one input port to one output port.
Example:
Enable input 2 to learn EDID data from output 4.
Operation:
Press
EDID + 2 + 4 + SELECT
All input ports learn EDID data from one output port.
Example: Enable all input ports to learn EDID data from output 4.
Operation: Press EDID + 4 + SELECT
Note: Each button flashes two times when the data is successfully copied, and then
extinguishes. Should the operation fail, each button flashes quickly for 3 seconds.
EDID setting
Select one type of EDID data from following four types of built-in EDID data:
 INPUT 1: 1080P 2D PCM2.0
 INPUT 2: 1080P 3D 5.1
 INPUT 3: 1080P 2D PCM2.0
 INPUT 4: 1080P 2D 5.1
To set the EDID data of one input port, press EDID and hold for 3 seconds to enter in
EDID setting statues, and then press O SELECT.
Example:
Set the EDID data of INPUT 4 to the forth type of EDID data.
Operation:
Press
EDID + 4 + 4 + SELECT
To set the EDID data of all input ports, press EDID and hold for 3 seconds to enter in
EDID setting statues, and then press O SELECT.
Example: Set the EDID data of all input ports to the second type of EDID data.
Operation: Press EDID + 2 + SELECT
Note: Each button will flash for two times when the data copies successfully, and then
extinguishes. Should the operation fail, each button quickly flashes for 3 seconds.