Clare Controls CM-MT4410-BT-70, Руководство пользователя

Страница: 13 / 44

HDBaseT 4x4 Matrix Switcher User Guide 5
Using the front control panel, press the buttons to directly control the switcher. Follow
the format below.
Input Channel (1-4) + Output Channel (1-4)
This will route the HDMI signal and IR from the selected input to the selected output.
Rear panel
Figure 2: Rear panel of HDBaseT 4x4 Matrix Switcher
(1) IR ALL IN Global IR control: An IR input signal in this port will pass through to
all connected HDBaseT receivers simultaneously.
Note: This applies to all IR inputs on this switch.
When using a control system, such as Clare Controls, Crestron, or
URC, the 3.5 mm female mono to 3.5 mm male stereo adapter
cable (included) must be used. The female mono end connects to
the control system. The male stereo end connects to the
CM-MT4410-BT-70.
(2) HDMI INPUTS Type A female HDMI connectors.
(3) IR OUT An IR signal transmitted via HDBaseT from any of the connected
receivers can be use on any of these outputs for an IR emitter to
control source equipment. These IR OUTs make up an IR matrix
with the IR INs on the HDBaseT receivers. They can be switched in
conjunction with the AV signal, or can be switched separately.